Whether it’s a new build or a renovation of an existing space, you want lighting solutions that deliver quality of light and substantial energy and maintenance savings. The new CoreLine Waterproof LED range can be used to replace traditional waterproof fluorescent fixtures.
| Width : | 80 mm |
| Length : | 1515 mm |
| Height/depth : | 76 mm |
| Housing color: | Gray |
| With motion sensor: | No |
| Light source : | LED not interchangeable |
| Front protection degree (IP): | IP65 |
| Suitable for surface mounting: | Yes |
| dimmable : | No |
| Effective luminous flux according to IEC 62722-2-1: | 3700 lm |
| Color temperature : | 4000 K |
| Arrangement included: | Yes |
| Suitable for emergency lighting: | No |
| With light source: | Yes |
| Light color : | White |
| LED panel: | No |
| Impact resistance: | IK08 |
| Ballast: | LED control equipment current controlled |
| Lamp holder: | Other |
| Housing material: | Plastic |
| Color temperature adjustable: | No |
| Light distributor: | Diffuser lens/optics/panel |
| Light emission: | Direct(direct) |
| Protection class according to IEC 61140: | I |
| Beam angle : | Extremely wide beam >80° |
| Connection method: | Plug clamp |
| Energy efficiency class of the light source according to EU regulation 2019/2015: | D |
| Color rendering index: | 80-89 (class 1B) |
| Consistent color (McAdam ellipse) : | SDCM3 |
| Voltage type: | AC |
| Lumen adjustable: | Standings |
| Grid design: | Without |
| Surface protection of housing: | None (untreated) |
| Glow wire flammability test according to IEC 60695-2-11: | 850 °C - 30 sec. |
| Photobiological safety according to EN 62471: | RG0 |
| Cover material: | Plastic matt/satin |
| Wiring type: | Suitable for through wiring |
| Beam angle adjustable: | No |
| Light distribution: | Symmetrical |
| Suitable for light line configuration: | No |
| Suitable for screen workshop: | No |
| With light sensor: | No |
| With (air) grilles: | No |
| Interchangeable gear: | Yes |
| System power, system performance: | 43 W |
| Suitable for pendulum suspension: | Yes |
| Suitable for wall mounting: | Yes |
| Suitable for ceiling mounting: | Yes |
| Suitable for flush mounting: | No |
| Number of poles: | 3 |
| Conductor cross-section: | 0.5 mm² |
| Nominal life L70/B50 at 25 °C: | 100000 h |
| Dimmer programmable: | No |
| Dimmer DALI : | No |
| Dimmable Dali-2 : | No |
| Dimmer DMX : | No |
| Dimmer manufacturer specific: | No |
| Dimmer phase cut-off: | No |
| Dimmer with potentiometer (built into the device): | No |
| Dimmer RF : | No |
| Dimmer with push button: | No |
| Dimmer DSI : | No |
| Dimmer Touch and Dim : | No |
| Dimmer Zigbee : | No |
| Dimmer mains voltage modulation: | No |
| Dimmer 0-10 V : | No |
| Dimmer 1-10 V : | No |
| Dimmer phase control: | No |
| Constant luminous flux control: | No |
| Luminaire with limited surface temperature "D" according to EN 60598-2-24: | Yes |
| Compatible with Google Assistant: | No |
| Compatible with Amazon Alexa: | No |
| Compatible with Apple HomeKit: | No |
| Compatible with Casambi : | No |
| With IFTTT support: | No |
| Control via Bluetooth: | No |
| Meets min. EIA life criterion L90 (at 50,000 hours at tq = 25°C): | No |
| Installation in insulated ceiling, fire resistance "F with roof": | No |
| Max. number of luminaires per line circuit breaker C16: | 60 |
| Strobe effect value SVM : | 0.4 |
| Flickering value Pst LM : | 1 |
| Max. number of luminaires per line circuit breaker B16: | 36 |
| Glare Reduction Level (UGR) : | 25 |
| Power factor : | 0.9 |
| Lumen maintenance at average life of 50,000 hours at 25°C ambient (tq): | 80% |
| Failure at average life of 50,000 hours at 25 °C environment (tq): | 5% |
| Nominal ambient temperature according to IEC62722-2-1 : | 25 °C |
| Nominal voltage : | 220 - 240 V |
| Nom. Current : | 115 - 200 mA |
